HushMat Ultra Thermal Insulating and Deadening Material Floor and Firewall Kit contains twenty 12 in. x 23 in. sheets with Silver Foil 38.7 Sq Ft. Blocks heat from entering the vehicle interior and reduces road noise.
HushMat is the easiest sound deadening and thermal insulating material to install. There are no tools or adhesives required. Super flexible and moldable. Manufactured in the USA for three decades, rated #1 in performance.
  • Reduce Heat Up to 40 Percent; Reduce Noise Up to 50 Percent
  • Proven To Perform From -30 F To 550 F
  • Manufactured in the USA for Over 25 years
  • Sound and Thermal Insulation from One Product
  • Eliminate Road Noise; Engine Noise; Vibration; Insulate Interior
  • Automotive OEM Specified and Approved
  • Requires No Pre-cleaning Of The Application Surface
  • No More Acetone Or Alcohol Surface Preparation
  • Ultra is 1.5mm Lightweight at 0.47 lbs. Per Square Foot
  • Ultra Requires No Heat Guns Or Messy Glue To Apply
  • One-Step Application With HushMat Ultra-Simply Peel and Stick

Information:

Treat your vehicles floor pan and firewall with the easiest to install and highest performance material in the sound deadening and thermal insulation materials category. Reduce that aftermarket engine, exhaust drone, road noise, vibration and the noise that disrupts your ride and reduce the heat that comes from engine, headers, exhaust and catalytic converter with one USA Made material light weight HushMat Ultra
Attributes
Add-On Part None
ASIN B001VKT9NM
California Proposition 65 No
Cold Flexibility Can be bent around 25 mm. mandrel at -30 degrees C with no cracking or loss of adhesion
Color Polymer - Black; Backing - Silver
Country of Origin (Primary) US
Emission Code Legal US
Flammability Tested per FMVSS 302, HushMat Ultra is self-extinguishing and meets all aspects of the standard
Hardness 6.5 - 9.0mm ?ASTM D-5
Harmonized Tariff Code (Schedule B) 4008210000
Hazardous Material Code N
Life Cycle Status Code Available to Order
NAFTA Preference Criterion Code B
Peel Strength Tested in 90 degree peel at a crosshead speed of 300mm per minute on a 25 mm wide test specimen. Average load in Newtons is reported.
R-Value 7
Safety HushMat Ultra is not considered a hazardous material. Care should be used in handling to avoid cuts from the foil. Gloves are recommended. The Material Safety Data Sheet is available upon request and should be read and understood before using this product.
SDR Required Flag N
SDS Sheet Number NA
Shelf Life At least 6 months when stored at 40 degrees C or less
Specific Gravity 1.47 (approx. 0.47 pounds per square foot)
Temperature Resistance HUSHMAT ULTRA will withstand a bake of 1 hour at 240 degrees C with no deformation, sag, or flow when baked in horizontal, vertical or inverted positions.
Thickness 1.5mm
GTIN 00881101104015

Write a review.

Note: HTML is not translated.
    Bad           Good